More CCNA questions

Last Updated on Tuesday, 3 May 2011 05:39 Written by EditorWednesday, 29 August 2007 07:21

Some Very Important CCNA questions for the interview.

Cisco Career Certifications are IT professional certifications for Cisco products. The tests are administered by Pearson VUE (Prometric previously administered the test; but as of 1 Aug 2007, no longer does). There are three levels of certification: Associate, Professional, and Expert.
To Prepare to these Test Follow the Below Cisco TEST Questions

1. You need to retrieve a file from the file server for your word processing application, which layer of the OSI model is responsible for this function?
   1. Presentation layer
   2. Application layer
   3. Session layer
   4. Transport layer
   5. Datalink layer
2. You are working in a word processing program, which is run from the file server. Your data comes back to you in an unintelligible manner. Which layer of the OSI model would you investigate?
   1. Application layer
   2. Presentation layer
   3. Session layer
   4. Network layer
   5. Datalink layer
3. The IEEE subdivided the datalink layer to provide for environments that need connectionless or connection-oriented services. What are the two layers called?
   1. Physical
   2. MAC
   3. LLC
   4. Session
   5. IP
4. You are working with graphic translations. Which layer of the OSI model is responsible for code formatting and conversion and graphic standards.
   1. Network layer
   2. Session layer
   3. Transport layer
   4. Presentation layer
5. Which is the best definition of encapsulation?
   1. Each layer of the OSI model uses encryption to put the PDU from the upper layer into its data field. It adds header and trailer information that is available to its counterpart on the system that will receive it.
   2. Data always needs to be tunneled to its destination so encapsulation must be used.
   3. Each layer of the OSI model uses compression to put the PDU from the upper layer into its data field. It adds header and trailer information that is available to its counterpart on the system that will receive it.
   4. Each layer of the OSI model uses encapsulation to put the PDU from the upper layer into its data field. It adds header and trailer information that is available to its counterpart on the system that will receive it.
6. Routers can be configured using several sources. Select which of the following sources can be used.
   1. Console Port
   2. Virtual Terminals
   3. TFTP Server
   4. Floppy disk
   5. Removable media
7. Which memory component on a Cisco router contains the dynamic system configuration?
   1. ROM
   2. NVRAM
   3. Flash
   4. RAM/DRAM
8. Which combination of keys will allow you to view the previous commands that you typed at the router?
   1. ESC-P
   2. Ctrl-P
   3. Shift-P
   4. Alt-P
9. Which commands will display the active configuration parameters?
   1. show running-config
   2. write term
   3. show version
   4. display term
10. You are configuring a router, which prompt tells you that you are in the privileged EXEC mode?
    1. @
    2. >
    3. !
    4. :
    5. #
11. What does the command “IP name-server 255.255.255.255″ accomplish?
    1. It disables domain name lookup.
    2. It sets the domain name lookup to be a local broadcast.
    3. This is an illegal command.
    4. The command is now defunct and has been replaced by “IP server-name ip any”
12. The following selections show the command prompt and the configuration of the IP network mask. Which two are correct?
    1. Router(config-if)#netmask-format { bitcount | decimal | hexadecimal }
    2. Router#term IP netmask-format { bitcount | decimal | hexadecimal }
    3. Router(config-if)#IP netmask-format { bitcount | decimal | hexadecimal }
    4. Router#ip netmask-format { bitcount | decimal | hexadecimal }
13. Which layer is responsible for flow control with sliding windows and reliability with sequence numbers and acknowledgments?
    1. Transport
    2. Application
    3. Internet
    4. Network Interface
14. Which processes does TCP, but not UDP, use?
    1. Windowing
    2. Acknowledgements
    3. Source Port
    4. Destination Port
15. Select which protocols use distance vector routing?
    1. OSPF
    2. RIP
    3. IGRP
    4. PPP

• Network Interview Questions
• Agile C++ Test Questions
• WinRunner Interview questions and Answers
• Common 101 Interview Questions
• My first interview in bangalore
• Test Case Design Questions & Answers
• Common Interview Questions
• CCNA Practice Questions
• ASP.NET Interview Questions
• QTP Interview Questions

1. madhan October 7, 2010 at 3:58 am

   plz send me the all ccna interview quetions and answers for freshers.
2. shaikh mubarak September 20, 2010 at 3:35 am

   please send me ccna and mcse interview question. i geting job in saudi . tell me how to qualifi interview will very much great full to you.i want some basic idea of ccna qustion.
3. Name (ankit ) September 4, 2010 at 6:57 am

   plz sir
   i m a fresher ,snd me some most imp topics and question fot CCNA
   aatrie@gmail.com
4. pavan August 19, 2010 at 12:13 pm

   please send me ccna (routing and switching ) interview question and answer and mcsa,,mcse,,with explanation
   and also send me ccnp question and answers for freshers
5. Rajesh August 8, 2010 at 11:17 pm

   sir plz send me ccna interview question i will very much great full to you thank you
6. shadab July 26, 2010 at 8:37 pm

   Sir,
   i am keen interested to work in gulf countries
   please send me some MCSE interview questions with answers
   i will be grateful to you for this
   thanks
   shadab
7. Harkirat Singh July 23, 2010 at 12:48 am

   Sir,

   Please send me all types of ccna interview questions and answers.

   Thanks,
   Harkirat Singh
8. lakshman vishwakarma July 6, 2010 at 5:32 am

   Hello sir
   this is lakshman frm hyd
   recently i got CCNA certification bt I’m not perfect in CCNA subject
   so recently im attended 2, 3, interviews on CCNA in MNC companies,
   but not selected
   so tel me easy way 2 face interview…………!!!!
   and tell me how to qualify in interview………!!!!
   Plz Sir send me imp Interview Questions and Answers………..Tnks
9. shahbaz ashrafi June 5, 2010 at 1:25 am

   please send me question answar of networking
10. Ekta May 1, 2010 at 2:34 am

    Hi

    Please let me know the answer to these questions. Thay would be very helpful.

    Thank YOu
11. kundan December 15, 2009 at 5:41 am

    plz send on my email mcse/ccna interveiw quetions
12. junaid khan December 9, 2009 at 12:34 am

    respected sir,
    please send me ccna and mcse interview question. i want to get job in dubai. and tell me how to qualifi interview. i will very much great full to thank you.
13. vivek tomar November 24, 2009 at 1:42 pm

    sir plz send me ccna and mcse interview question i will very much great full to you thank you
14. vivek tomar November 24, 2009 at 1:40 pm

    sir
    plz send me the tips of cccna exam.and cost of ccna & mcse per paper
    thank you
15. umesh kumar November 12, 2009 at 10:51 am

    sir, plz sent some more questions related ccna.with answers.thanks
16. Chaitanya November 11, 2009 at 2:31 am

    Please send the answers with explanations….
17. suhail October 20, 2009 at 2:49 am

    I want the ans of following question mention above and how to prepare for ccna certification
18. rajasehar October 1, 2009 at 5:16 am

    i wont some basic idea for ccna
19. Deepanjali July 29, 2009 at 4:06 am

    sir please send me such type more questions with answere, related to mcse and ccna…. THANKYOU
20. som July 21, 2009 at 5:20 pm

    plz send me more question with answers………..
21. vipin sharma April 22, 2009 at 3:19 am

    please send me the all ccna interview question